Leading 10 common forklift accidents ， forklift procedure should pay attention to these issues ！.

Don't undervalue the forklift at the office. If the procedure is not good, there will be significant accidents in mins, and there are lots of mishaps including forklifts.

Instance 1: The forklift freight blocked the vehicle driver's view, and the individual in front can not be discovered, resulting in a rolling accident.
Situation 2: In order to maintain the balance of the forklift when lifting heavy products, the staff members utilized their body weight as the counterweight, which nearly created casualties.
Situation 3: The width of the forklift cargo surpasses the allowed width of the course and holds on the roadside shelf, which practically causes an accident.
Instance 4: Forklift is speeding up and surrender during a turn.
Situation 5: The forklift vehicle driver did not see the pedestrian, and the pedestrian did not observe the forklift.
Situation 6: The forklift lifts the workers illegally, the forklift motorist does not wear the seat belt, the forklift lifter drops and the driver is squashed when the forklift rolls over.
Instance 7: The forklift vehicle driver did not put on a seat belt and dropped from the automobile when it surrendered and was crushed.
Forklift operation must focus on these issues ：.

Begin.
1. Prior to starting, observe the environments, and after confirming that there are no barriers that impede the security of driving, beep the horn initially and then begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) scale must be safe prior to starting.
3. When the forklift starts with a lots, the chauffeur needs to first verify that the lots is stable and trustworthy.
4. The beginning needs to be sluggish and consistent.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground must be maintained 300mm-400mm, and the pole ought to be slanted backward. .
2. Do not lift the fork too expensive when driving. When going into and leaving the work website or while driving, be careful that there will be no obstacles in the sky. When the tons is traveling, the fork has to not be raised too high, which will certainly impact the stability of the forklift. .
3. After unloading, the fork must be reduced to the regular driving placement prior to driving. .
4. When turning, if there are pedestrians or vehicles close by, the driving signal needs to be provided first. High-speed sharp turns are restricted. High-speed sharp turns will cause the lorry to lose side stability and tip over. .
5. When the forklift is downhill, it is strictly forbidden to switch off the fire and slide, and it is forbidden to brake suddenly while driving with lots unless there are special situations.
6. When the forklift is running, it should comply with the web traffic rules in the manufacturing facility and should maintain a certain security range from the car ahead. .
7. When the forklift is running, the lots must remain in the most affordable setting that does not hinder the driving, and the gantry must be appropriately tilted back. The tons shall not be increased except when piling or filling. .
8. The elevation of the load should not block the vehicle driver's view. In special conditions, when the thing impacts the forward vision, drive at a low speed when reversing.
9. It is restricted to turn on the ramp, nor to drive across the ramp. .
10. The secure driving rate of the forklift in the factory area is 5 km/h, and it should drive safely at a low speed when going into the manufacturing workshop location. .
11. When the forklift is raised, lifted or driven, it is forbidden for workers to depend on the fork to hold items and play a balancing role. .
12. If problems are found, they will be fixed and reported in a prompt manner, and they will certainly never ever run with ailments or hide them.

filling and discharging.
1. When fork-loading products, the distance between the two forks ought to be adjusted as required to make the load of the two forks balanced and not skewed, and one side of the thing must be against the rack. .
2. It is prohibited to work with a single fork or make use of a fork top or draw. In special circumstances, safety and security indication need to be established to advise bordering pedestrians. .
3. In the process of packing and dumping items, the forklift has to be braked with the brake. .
4. The speed of the lorry must be slow and constant. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled items and hurt individuals. .
5. When using a fork to fork the goods, the fork Electric Forklift Truck for Warehouse must be as deep as possible under the tons, and it needs to be noted that the fork idea ought to not touch other items or objects. The load ought to be supported with very little back tilt of the gantry so that the tons does not slide backwards. The pole can be tilted onward a little when the tons is decreased to permit easy positioning of the lots and removal of the forks. .
6. It is forbidden to fork products at high speed and hit difficult things with the fork head. .
7. When the forklift is functioning, it is forbidden for individuals to loaf the fork, so as to stay clear of the collapse of the goods and hurt people. .
8. Overwhelming is forbidden, and it is forbidden to use forks to lift personnel to take part in high-altitude procedures to stay clear of high-altitude dropping accidents. .
9. It is not allowed to use the brake inertia to slide, put, round or roll objects. .
10. It is not Electric Forklift Truck for Warehouse allowed to make use of forks to choose, turn pallet dump.

Leaving .
1. It is prohibited to leave the forklift when the things on the fork impend. Prior to leaving the forklift, you should unload the goods or reduced the fork framework.
2. Draw the emergency brake deal with to dead or dispirit the hand brake switch.
3. The engine is switched off and the power is cut off. (Except for special scenarios, such as the vehicle driver does not leave the car's line of sight and does not go beyond 1 minute).
4. Remove the secret. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look must be checked, and fuel, lubing oil and air conditioning water need to be included.
2. Examine the security performance of beginning, running and stopping.
3. Examine whether the lights and horn signals are total and effective.
4. Throughout the operation of the forklift, examine whether the pressure and temperature level are typical.
5. After the forklift is running, the exterior leak needs to likewise be examined and the seals ought to be replaced in time.

Forklift Safety Operation Specifications.
1. You have to inspect before leaving the car;.
2. When you come across someone in front of you throughout driving, you should send a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the low point of the freight need to be 0.3 m ~ 0.4 m in the air;.
5. The transforming should not be also sharp to avoid the propensity of "free switching";.
6. Adding and down the incline needs to be slow and uniform, and no switching on the incline is permitted.
7. Do not drive throughout the slope. When the slope is greater than 10%, the automobile must be driven backwards when going downhill;.
8. When the forklift personnel carry the goods and move on, if they encounter large or hefty items and most likely to the motorist's line of vision, they ought to take the turning around workout
.
The "Eight Prohibitions" need to be complied with in the operation.
1. Single fork procedure is not enabled.
2. It is not allowed to raise the goods for far away driving.
3. It is not allowed to grab the goods by handing over the pallet with the fork.
4. It is not allowed to straight shovel chemicals, flammables and other hazardous chemicals with forks.
5. It is not permitted to use inertia pressure to pick up the goods.
6. It is not enabled to make use of braking force to exile round or easy-to-roll items.
7. It is not permitted to bring people to deal with the pallet or fork, and it is strictly restricted to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Vehicle parking is not permitted under the following conditions.
1. Curves, narrow roads, railway crossings;.
2. Sections with a longitudinal incline more than 5%.
3. When there is an barrier on one side of the road, the contrary side of the area with the very same size as the obstacle need to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844